Bristan Value VAC LBSM C NH Instrucciones de instalación y manual del usuario - Página 3

Navegue en línea o descargue pdf Instrucciones de instalación y manual del usuario para Productos de fontanería Bristan Value VAC LBSM C NH. Bristan Value VAC LBSM C NH 8 páginas. Bath shower mixer

Imprimir página

Bristan Value VAC LBSM C NH Instrucciones de instalación y manual del usuario

Installation

Identify all components are present prior to installation.

Fit the mixer body (9) (see page 4) to the bath ensuring that the foam gasket (10) is fitting

between the mixer body (9) and the bath.

Secure the mixer to the bath using the rubber washers (11) and backnuts (12).

Connect both hot and cold water supplier to the mixer using ¾" tap connectors (not

supplied).

Fit the conical end of the hose to the mixer body ensuring that the small washer is fitted,

and the ribbed end of the hose to the handset ensuring that the small washer is fitted.

Prior to drilling into walls, check that there are no hidden electrical wires, cables or water

supply pipes. This can be checked with the aid of an electronic detector.

If power tools are used do not forget to:

6. Fix the wall bracket to the wall using the fixings provided, ensuring that the hose will reach it.

Note:

Note: The ribbed end of the hose fits into the wall bracket and not the shower head.

Note:

7. Turn on both water supplies and open both valves. Operate the mixer in both bath fill and

shower mode letting the water run for a few minutes to check all joints and connections for

leaks. After using the shower mode the mixer automatically reverts to bath fill mode.

VAC LBSM C NH is not fitted with handles, Handles will need to be purchased separately.

- Wear eye protection

- Unplug equipment after use

Handle Options

Club Heads

Cross Heads

3 Inch Lever

6 Inch Lever