Adexi WH0270A Manual - Página 10

Navegue en línea o descargue pdf Manual para Estación meteorológica Adexi WH0270A. Adexi WH0270A 16 páginas.

Imprimir página

3. After inserting the battery, the remote

sensor LED indicator will light for 4

seconds, and then flash once per

60 seconds thereafter. Each time it

flashes, the sensor is transmitting

data.

4. Close the battery door.

2.4 DISPLAY CONSOLE SET UP

1. Move the remote thermometer(s)

about 2 to 3 m away from the display

console (if the sensor is too close, it

may not be received by the display

console).

2. Remove the battery door on the back

of the display, as shown below. Insert

one AA (alkaline or lithium, avoid

rechargeable) battery in the back of

the display console.

1. Suspension eye for wall hanging

2. Desk Stand

3. °C / °F button

4. High / Low Record button

5. Battery Compartment

6. Battery Compartment door

All of the LCD segments will light up for

a few seconds to verify all segments are

operating properly.

3. Replace the battery door, and fold out

the desk stand and place the console

in the upright position.

The console will instantly display

indoor temperature and humidity. The

remote temperature will update on the

display within a few minutes.

While in the search mode, the

reception search icon

If the remote does not update, please

reference the troubleshooting guide in

Section 7.

2.4.1

Display Console Layout

1. Outdoor Temperature

2. Indoor Temperature

3. Indoor Humidity

4. Outdoor Temperature High / Low

Record

5. Indoor Temperature High / Low

Record

6. Indoor Humidity High / Low Record

7. Wireless Reception Icon

flash.