DecaLED Controller 3 Mini Manual - Página 10

Navegue en línea o descargue pdf Manual para Controlador DecaLED Controller 3 Mini. DecaLED Controller 3 Mini 10 páginas.

Troubleshooting

The DecaLED

Controller 3 Mini does nothing.

•

Check that the device is connected to the socket via the supplied power cord and that it is switched

on.

•

Check that the red light on the power switch on the backside of the device is turned on. If not, remove the

device from the socket and change the fuse. This is located under a small lid near the power adapter.

•

Check that the Power LED is on. If not, return the device.

The DecaLED

Controller 3 Mini does not respond to DMX.

•

Check that the DMX control LED is on.

•

If the control LED is not on, check that DMX is present and/or that the connector is connected correctly.

•

Check that the DMX addresses have been set correctly by means of the DecaLED

The connected DecaLED

•

Check that the output cables and all connections have been connected correctly. If necessary, remove

all outputs except 1.

•

Only a maximum loading capacity of 3A(1A per individual channel) is allowed on a single output and the

maximum amount of the total load can not exceed 4A distributed over all 2 outputs.

The DecaLED

Controller 3 Mini cannot be programmed.

•

Remove the DMX signal when connecting the DecaLED

•

Check the DecaLED

•

Check the batteries or connect the supplied power supply to the DecaLED

If you cannot find a cause for a defect, we advise you to contact your supplier. Leave repairs to professionals.

Never try to repair the device yourself, as this could influence your warranty.

Info: www.lagotronics.com

24V products do not respond.

Setup Tool and its cables and connections.

Setup Tool.