Bristan FH TDRD02 C Instrucciones de montaje - Página 2
Navegue en línea o descargue pdf Instrucciones de montaje para Cocina & Accesorios de baño Bristan FH TDRD02 C. Bristan FH TDRD02 C 2 páginas. Traditional shower
Imprimir página
This shower rose is intended to be used in conjunction with other products, such
as a shower arm and valve.
INSTALLATION
This shower head should be arranged in your system with a supply of pre-mixed
water from a shower valve.
This product is designed to be fitted to shower arms with a male ½"BSP thread. If
replacing a shower rose, simply unscrew the current one and fit the new rose. The
shower rose comes with a swivel joint, so the rose can be positioned as desired.
Tighten by hand ONLY. Check joint and connections for any leaks, if this occurs
check the condition of the washer. Replace if necessary or reseat correctly then
re-tighten.
In order to maintain optimum spray, we advise that the shower rose face plate
be regularly cleaned, particularly in hard water areas.
A
FH TDR01 C
:
A = 145mm / B = 126mm
FH TDR02 C
:
A = 200mm / B = 126mm
FH TDR03 C
:
A = 300mm / B = 158mm - (Minimum working pressure of 0.5bar)
INSTALLATION DIAGRAM
B
AFTERCARE INSTRUCTIONS
Your fitting has a high quality finish and should be treated with care to preserve the
visible surfaces.
All surface finishes will wear if not cleaned correctly, the only safe way to clean your
mixer is to wipe with a soft damp cloth. Stains can be removed using washing up
liquid. All bath cleaning powders and liquids will damage the surface of your fitting,
even the non-scratch cleaners.
NOTE: Never use abrasive detergents or disinfectants or those containing
alcohol, hydrochloric acid or phosphoric acid.
www.qssupplies.co.uk