Bristan FLT 3HBAS C Manual de instrucciones de instalación - Página 9

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Cocina & Accesorios de baño Bristan FLT 3HBAS C. Bristan FLT 3HBAS C 16 páginas. Flute tap range

Imprimir página

Installation

3 Hole Basin Mixer/ Bath Filler

1. With the backnut, metal and rubber

washers fitted to the side body threaded

tail, feed the side body through the hole

from underneath the basin/ bath.

2. Screw the shroud onto the treaded tail

and tighten the backnut underneath onto

the bottom of the basin/ bath and replace

the handle, tighten the grub screw and

push fit the cap.

3. Fit the spout to the basin/ bath

tightening the backnut.

4. Attach the T- joint assembly to the bot-

tom of the spout and connect to the side

bodies (hot on the left, cold on the right

when viewed from the front), by using flexi

tails supplied.

5. Connect the hot and cold water

supplies to the side bodies (hot to the left,

cold on the right hand side), fully open

both valves, letting the water run for a few

minutes to flush the system.

6. Fit the clicker waste (basin mixer only)

ensuring the rubber washer is fitted

between the basin and the waste.

Place the other rubber washer

under the basin and secure in place by

tightening the backnut. In order to fill the

basin, the button in the middle of the

waste needs to be pressed down.

To release the water, press the button

again.

7. Check all joints and connections

for leaks.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.