Airflow 200G-XX Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Ventilador Airflow 200G-XX. Airflow 200G-XX 12 páginas. Builder’s choice gallery edition

Step 15.

Remove light kit fitter from carton.

Using a Phillips screwdriver, unscrew the

three screws from the fan and set aside.

Connect the 9-pin connector from the

fan to the connector on the light kit fit-

ter as shown, aligning the red squares

and making sure they snap into place.

Connect the light kit fitter to the bot-

tom of the fan as shown, tucking exposed

wires into the fitter, and aligning the

screw holes. Using the three screws from

step b, attach the light kit fitter to the

fan.

Screw two 60-watt lightbulbs (not

included) onto the light kit fitter.

Remove plastic from pull chain.

Fish the pull chain extenders through

the cap and through the center hole of

the bowl. Fit bowl and cap around the

light kit fitter.

Using the finial, attach the bowl and

cap to the light kit fitter.

Attach pull chains on light kit fitter to

pull chain extenders.

LIGHT FIXTURE INSTALLATION

PULL CHAIN EXTENDERS

SCREWS

FINIAL

UILDER

HOICE

™

ALLERY

DITION

9-PIN CONNECTOR

LIGHT KIT FITTER

LIGHTBULBS

BOWL

CAP