Bristan PM SQSHXDIV C Manual de instrucciones de montaje - Página 3
Navegue en línea o descargue pdf Manual de instrucciones de montaje para Unidad de control Bristan PM SQSHXDIV C. Bristan PM SQSHXDIV C 6 páginas. Prism single control surface mounted shower valve with rigid riser & diverter to handset
Imprimir páginaCleaning
These finishes should be cleaned using a mild washing up detergent or soap solution, rinsed
with clean water and wiped dry with a soft cloth.
Service Guide
If your thermostatic mixing valve fails to operate it could be the result of incorrect installation.
Please refer to installation and sit requirements. If the valve has operated correctly for a time,
but no longer performs acceptably, it may require servicing/cleaning. Proceed as follows;
1) Isolate hot and cold supplies.
2) Remove the headwork assembly and spline adaptor if applicable
3) For concealed models remove the front plate by inserting a thin blade at
the back of the plate and sliding it around the perimeter. Carefully pull the plate off the valve.
4) Unscrew the cartridge (standard right hand thread).
5) Remove the thermostat, distributor assembly and spring.
6) Remove all visible 'O' rings and washers from the body.
30mm spanner required (standard thread).
Ensure that you DO NOT damaged the valve,
pipe work or backplate when undoing the
headwork.
9
Ensure that you don't damage
the faces of the piston.
Compatible Systems
Instantaneous heated system (Gas or Electric)
Gravity fed system
1 metre
Head
Unvented mains pressure system
System includes:
Expansion vessel
Pressure relief valve
Temperature relief valve
Pressure reducing valve
Energy cut-outs
Key
Shower inc. non-return valves
Isolating valve
Tempering valve
Pressure regulating valve
Strainer
Expansion vessel (optional)
Twin Impeller Pump
Pumped system
Mains pressurised hot water system
2