Bristan ST PUMP20SG Manual de instrucciones de instalación, funcionamiento y mantenimiento - Página 14
Navegue en línea o descargue pdf Manual de instrucciones de instalación, funcionamiento y mantenimiento para Bomba de agua Bristan ST PUMP20SG. Bristan ST PUMP20SG 20 páginas. Standard 1.5/2.0 bar twin/single ended shower pump
Imprimir página6 MAINTENANCE
z
6.12 Water scale: As water is heated scale deposits are released in areas of hard
water, scale can cause the mechanical seal to stick if left without use for long
periods. The pump must be run for at least 5 minutes every four weeks to
"exercise" all working parts. Run on cool water. See Section 7 - Technical
Specification for note on water temperature. This particularly applies to guest
bathrooms used infrequently.
6.13 Cleaners, Disinfectants and Descalents:
Do not remove the terminal box cover. No user serviceable
parts inside.
6.11 There are no user serviceable parts available for the pump.
Acid based descalents and aggressive cleaning agents must not
come into contact with the pump. The pump must be removed from
the system prior to the use of these products. The system should be
flushed to remove all chemicals before the pump is re-connected.
If in any doubt as to the suitability of the chemical solutions, please
contact Bristan.
- 14 -
Cont ...