GreeenTek Whole House HS 3.0 Manual de instalación, mantenimiento y funcionamiento - Página 8
Navegue en línea o descargue pdf Manual de instalación, mantenimiento y funcionamiento para Limpiador de aire GreeenTek Whole House HS 3.0. GreeenTek Whole House HS 3.0 11 páginas.
Imprimir páginaTips
to installer
It is recommended that the filtration unit have
a devoted receptacle with 115V. It is not rec-
ommended to connect unit with an extension
cord. If no receptacle is available please call
an electrical contractor to have one installed.
MAKE SURE TO INSTALL
FILTER ACCORDING TO
AIR FLOW DIRECTION FOR
MAXIMUM PERFORMANCE
Check for this symbol on each
filters and it is located on the
unit's motor plate.
Installation
2.4 Installing the unit
Step 3: Mount Hepa
Align unit into place.
figure2.3a -
Unfold the ducting flairs
figure 2.3b -
completly to sandwich the return air plenum
between the ducting flair and the filtration unit.
P AGE 8
GUIDE
(Continued)
Step 3: (Continued)
Install unit as usual using all
figure 2.3c -
supplied fastening hardware.
Step 4: Finishing
Stage 1: Pre-Filter
Stage 2: Carbon filter
Stage 3: HEPA Filter
Remove protective plastic covers
figure 2.4a -
from all filters and replace them in their prop-
er location (Stage 1, 2 and 3).
Replace door and insert power
figure 2.4b -
cord into the receptacle of the filter units and
the other end into wall outlet.