Bristan IRSD1-BN Instrucciones de instalación y manual de usuario - Página 6
Navegue en línea o descargue pdf Instrucciones de instalación y manual de usuario para Dispensador Bristan IRSD1-BN. Bristan IRSD1-BN 16 páginas. Infrared automatic soap dispensor
También para Bristan IRSD1-BN: Instrucciones de instalación y manual de usuario (16 páginas)
Imprimir página
Installation
1. Fit The Spout
Fit the spout to the sink / basin
ensuring the dispensing cable and
sensor cable are threaded through
the hole in the sink / basin.
2. Secure Spout to Sink / Basin
Screw the metal backnut onto
the thread of the spout upto the
underside of the sink / basin.
Tighten backnut using a suitable
spanner.
3. Fit Wall Brackets
Position the brackets onto the wall
surface and mark the position of the
fixing holes.
Remove the brackets and drill
suitable holes for the wall plugs
supplied.
Before drilling into walls, check that
there are no hidden electrical wires,
cables or water supply pipes. This
can be checked with the aid of
an electrical detector:
If power tools are used do not forget
to:
- Wear eye protection
- Unplug equipment after use
Fit the wall plugs and position the
brackets into position and secure
using the screws provided.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
6
Battery
Wall
Bracket
Dispenser &
Sensor cables
Bottle Wall
Bracket