Gamma 5002 Manual del usuario - Página 13

Navegue en línea o descargue pdf Manual del usuario para Máquinas de encordar Gamma 5002. Gamma 5002 18 páginas.

PROBLEM

String slips in clamps

String slips in gripper

String clamp slips on base

String clamp winged lock knob is difficult to

turn

String tension too tight or too loose

For additional assistance, contact Gamma Sports Customer Service at 1-800-333-0337

With time and use, the clamping surfaces of your machine may become oily or dirty and result

in string or clamp slippage while stringing. Periodic cleaning of the following parts is

recommended.

String Clamps

Clean the inside gripping surfaces of the string clamp jaws by inserting a cloth or pipe cleaner

soaked with isopropyl alcohol between the jaws and rub back and forth. If the build-up is

excessive, dismantle the string clamp jaws to expose the gripping surfaces by removing the

adjustment screw. Using a small nylon brush, (such as a toothbrush), scrub the inside

surfaces until all debris is removed. Clean the jaws with isopropyl alcohol and re-assemble.

String Clamp Base

Clean the base of the clamps and the top of the turntable with isopropyl alcohol.

String Gripper

Clean inner gripping surfaces with isopropyl acohol soaked cloth or pipe cleaner.

TROUBLESHOOTING TIPS

CARE and CLEANING

- Adjust gap between jaws

- Clean clamp jaws

- Clean gripper jaws

- Adjust Gripper Jaw Stop Screw

- Clean base of clamp and top of

turntable

- Check for proper position of thrust

bearing in the base of the winged lock

knob

- Check tension using a tension

calibrator and adjust machine calibration

if necessary

SOLUTION