Gamma 6002 Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Máquinas de encordar Gamma 6002. Gamma 6002 20 páginas.

aligns with the line on the knob support. To decrease tension by 1 or 2 lbs, turn the knob

clockwise until the "2" or "1" mark on the knob aligns with the line on the knob support.

STRINGING THE FRAME

Setting Tension

The GAMMA 6002 utilizes a rotary adjusting

knob along with a linear tension scale to

indicate the tension setting. The scale is

divided into 3 lb increments and each 1/3 turn

of the tension knob changes tension by 1 lb.

To set the desired tension, rotate the tension

knob and align the mark on the spring guide

with the desired tension setting on the scale.

When the "0" mark on the knob aligns with the

line on the knob support the tension will be

that indicated on the scale. To increase ten-

sion by 1 or 2 lbs turn the knob counterclock-

wise until the "1" or "2" mark on the knob

Fixed Clamp Operation

The fixed clamps supplied with your GAMMA

6002 are of a dual action design. The string

clamp and the clamp base operate indepen-

dently of one another.

To clamp a string, lift the clamp head and

place the string between the jaws. Depress

the clamp head lever to secure the string.

Fixed Clamp Operation

Rotate the winged lock knob clockwise to

secure the clamp base to the turntable.

Reverse the clamping procedure to un-clamp

the string.

Note: If the string slips in the string clamp

while tensioning, adjust the gap between the

clamp jaws as per the instructions on page

14.