Gamma 6004 Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Máquinas de encordar Gamma 6004. Gamma 6004 20 páginas. 6 point mounting
También para Gamma 6004: Manual del usuario (20 páginas), Manual del usuario (20 páginas), Manual del usuario (19 páginas)

Imprimir página

ASSEMBLY INSTRUCTIONS

Travel Stop

Note: The tensioner bar is equipped with a tensioner

travel stop to limit travel of the tensioner along the bar

and prevent contact between the tensioner and the

racquet mounting system while stringing. The travel stop

is located about midpoint along the tensioner bar below

the gear track.

To disengage the stop, pull and hold the knob, rotate 90

degrees and release. To engage the stop, repeat the

above procedure until the travel stop pin protrudes

beyond the opposite surface of the tensioner bar.

Setting the Gripper Jaw Spacing

The gripper jaws of the 6004 tensioner are adjustable to

accomodate varying string gauges.

If the string slips through the gripper jaws while pulling

tension, rotate the gripper jaw adjustment screw counter-

clockwise.

If the string is damaged while pulling tension, rotate the

gripper jaw adjustment screw clockwise.

The jaws will be properly adjusted when there is enough

pressure to securely grip the string without causing

damage to the string.