Gamma Progression 600 Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Máquinas de encordar Gamma Progression 600. Gamma Progression 600 15 páginas.

isopropyl alcohol. After this type of thorough cleaning, the post and tube should be treated

with a light coating of machine oil to protect the surfaces against corrosion and to ensure

smooth operation.

FIXED CLAMP UPGRADE

Fixed Clamp Installation

To install the clamps, remove the winged lock

knob to separate the knob from the lower

guide bushing. Be careful not to lose the

radial thrust bearing components located in

the center recess of the knob.

Align the clamp base with the clamp slot of

the turntable base. Insert the clamp guide

bushing into the clamp from the bottom of the

turntable making sure to engage the guide

with the clamp slot.

Fixed Clamp Installation - (cont.)

Place the load bushing into the top of the

clamp base mating it to the lower guide

bushing. After checking that the thrust bear-

ing is positioned correctly in the base of the

winged lock knob, screw the knob into the

base bushing until fully seated.

The post of the string clamp head and tube

of the string clamp base are treated with

grease to provide protection against corro-

sion during shipping. Remove any exces-

sive grease with a clean cloth prior to use.

The post and tube may also be cleaned with