Gamma Progression ES II+ Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Máquinas de encordar Gamma Progression ES II+. Gamma Progression ES II+ 17 páginas.

STRINGING THE FRAME

increased friction between the clamps and the string to allow for reduced clamping pressure

while securing and holding the string under tension.

the slot in th clamp base. If the rotation is not sufficient to allow smooth operation of, adjust

the Clamp Base Locking Nut as outlined below.

Note: If the string slips in the string clamp while tensioning, adjust the gap between the clamp

jaws as per the following instructions.

Clamp Head Operation

"Quick Action"

Clamps are of a dual

action design where as the clamp head and

clamp base operate independently of one

another.

To clamp a string, lift the clamp head and

place the string between the jaws and de-

press the clamp head lever to secure the

string. The clamping pressure applied to the

string should be adjusted to provide suffi-

cient pressure to secure the string when

subjected to the desired pulling tension. The

diamond coated gripper plates provide for

Clamp Base Operation

Rotate the Base Locking Lever clockwise to

secure the clamp base to the turntable.

Reverse the clamping procedure to unlock

the string clamp. The Locking Lever is spring

loaded to assist the unlocking of the clamp

base.

The Locking Lever should be tightened

enough to prevent clamp base slippage on

the turntable, when the desired tension is

placed on the string. To go from the loose

position to the clamped position and back,

generally requires the rotation permitted by