Gamma Progression STII Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Máquinas de encordar Gamma Progression STII. Gamma Progression STII 19 páginas.

tension by 1 or 2 lbs turn the knob counterclockwise until the "1" or "2" mark on the knob aligns

with the line on the knob support. To decrease tension by 1 or 2 lbs, turn the knob clockwise

until the "2" or "1" mark on the knob aligns with the line on the knob support.

STRINGING THE FRAME

Travel Stop

Setting Tension

The STII utilizes a rotary adjusting knob

along with a linear tension scale to indicate

the tension setting. The scale is divided into

3 lb increments and each 1/3 turn of the

tension knob changes tension by 1 lb. To set

the desired tension, rotate the tension knob

and align the mark on the spring guide with

the desired tension setting on the scale.

When the "0" mark on the knob aligns with

the line on the knob support the tension will

be that indicated on the scale. To increase

Tensioner Travel Stop

The tensioner bar is equipped with a

tensioner travel stop to limit travel of the

tensioner along the bar and prevent contact

between the tensioner and the racquet

mounting system while stringing. The travel

stop is located about midpoint along the

tensioner bar below the gear track.

To disengage the stop, pull and hold the

knob, rotate 90 degrees and release. To

engage the stop, repeat the above proce-

dure until the travel stop pin protrudes be-

yond the opposite surface of the tensioner

bar.

Setting the Gripper Jaw Spacing

The gripper jaws of the tensioner are adjust-

able to accomodate varying string gauges.

If the string slips through the gripper jaws

while pulling tension, rotate the gripper jaw

adjustment screw counter-clockwise.

If the string is damaged while pulling tension,

rotate the gripper jaw adjustment screw clock-

wise.

The jaws will be properly adjusted when

there is enough pressure to securely grip the

string without causing damage to the string.