Gamma X-2 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Máquinas de encordar Gamma X-2. Gamma X-2 11 páginas.
También para Gamma X-2: Manual del usuario (16 páginas)

Imprimir página
Gamma X-2 Manual del usuario

MOUNTING THE RACQUET

Installing the Racquet Support Adapters
The GAMMA X-2 is supplied with two styles
of Racquet Support Adapters. A thick profile
adapter for widebody racquets and a thin
profile adapter for conventional racquet
frames. The Adapters are also tapered, use
the highest side of the adapter that does not
interfere with the string grommet holes.
Adjusting the Frame Support Posts
Place the racquet frame over the center
posts and onto the frame support posts.
Loosen the locking screws on one support
post and slide the post in the appropriate
direction until the plastic adapter contacts
the frame. Securely tighten the locking
screws. Adjust the opposite post in the same
manner.
It is extremely important both plastic adapt-
ers are in contact with the frame to prevent
racquet damage.
Securing the Racquet
With the frame support posts properly ad-
justed, place the frame hold down plates
over the center screws and tighten the clamp
bar knobs securely. Do not overtighten the
knobs as frame damage may occur.
Note: Inverted throat racquet frames may
require the throat clamp plate to be rotated
180 degrees to match the frame.
4