Gamma X-ST Manual del usuario - Página 16

Navegue en línea o descargue pdf Manual del usuario para Máquinas de encordar Gamma X-ST. Gamma X-ST 19 páginas.
También para Gamma X-ST: Manual del usuario (19 páginas), Manual del usuario (19 páginas)

Imprimir página

TROUBLESHOOTING TIPS

PROBLEM

String slips in clamps

String slips in gripper

String clamp base slips on turntable

Tensioner slips on Tensioner Bar

after brake lever is released

String tension too tight or too loose

With time and use, the clamping surfaces of your machine may become oily or dirty and result

in string or clamp slippage while stringing. Periodic cleaning of the String Clamps, String

Clamp Base, and String Gripper is recommended. Knife sharpening stones work well for

cleaning the diamond coated string clamping surfaces. Cleaning with a solvent such as

isoproyl alcohol and a mild abrasive tool such as a toothbrush also works well to remove

oily or greasey build up.

CARE & CLEANING

SOLUTION

- Adjust gap between clamp jaws

- Clean clamp jaws

- Adjust gripper jaw spacing

- Clean gripper jaws

- Clean bottom of clamp & glide bar with

alcohol

- Adjust clamp base locking nut

- Clean tensioner brake disc

- Adjust tensioner brake lever

- Check tension using a tension

calibrator, adjust machine calibration if

necessary