Gamma X-ST Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Máquinas de encordar Gamma X-ST. Gamma X-ST 19 páginas.
También para Gamma X-ST: Manual del usuario (19 páginas), Manual del usuario (19 páginas)

Imprimir página

STRINGING THE FRAME

Pulling Tension

Wrap the loose section of string once around

the roller guide and insert the string between

the diamond dust coated string gripper plates.

Pull the string perpendicular to the gripper

plates while slowly rotating the tensioner

crank clockwise until the brake lever pops

out of the latching block. The string is now

tensioned and can be clamped in place with

the remaining ﬁ xed clamp.

Repeat the above steps until all main strings

are installed. Tie off ends of main strings as per

racquet manufacturers recommendations.

Weaving the Cross Strings

Weave the cross strings over and under the

main strings being careful to alternate the

weave direction of each consecutive cross

string so as to be opposite of the previously

installed cross string.

Completing the String Job

Once the ﬁ nal cross string is tensioned and

clamped, tie off at the appropriate hole speci-

ﬁ ed by the racquet manufacturer.