Gamma Silhouette Oculus XL Z Manual del usuario - Página 6
Navegue en línea o descargue pdf Manual del usuario para Equipos de iluminación Gamma Silhouette Oculus XL Z. Gamma Silhouette Oculus XL Z 20 páginas. 24x60w rgbw led wash with pixel mapping
Imprimir página
2. Setup and Operation
Using the LCD Menu and Buttons
The Oculus features Up/Down/Menu/Enter Buttons to navigate the menu. Use "ENTER" to
go into the menu, UP/DOWN to make selections, and MENU to go back to a previous
menu.
Menu Structure:
Menu
Silhouette Oculus XL Z – GAMMA LED Vision
1. Pan Degree
2. Mic Sense
3. Pan Invert
4. Tilt Invert
5. No Signal
6. Fan Set
7. ArtNet Set
8. Default
1. 540°, 2. 360°
001-100
NO/YES
NO/YES
1. Black Out, 2.
Hold
1. Auto, 2. Low,
3. High
ArtNet Enable
2. Universe
3. IP Model
4. Custom
5. SubNet Mask
YES/NO
Sets the pan range, which can be
limited to 360° if desired.
Sensitivity for Sound-Active Mode
Inverts the Pan Control
Inverts the Tilt Control
Sets the behavior on DMX loss.
Black out sets the DMX values to
zero, whereas "Hold" will hold the
last DMX value until DMX is
received again or the fixture is
restarted.
Sets the fan speed. Warning: Use
with caution, if the light is in a hot
environment and low is selected, it
may shut down due to heat.
1. ON, 2. OFF
0-255
1: 2.X.X.X Auto ,
2. 10.X.X.X Auto ,
3. Custom
Sets the custom IP address.
Sets the Subnet Mask
Resets the Fixture to Factory
Enable or
Disable Art-Net
Control
Sets the Art-Net
Universe
Sets the IP
address type for
Art-Net
Page 6 of 20