Decima OKO Manual del usuario - Página 7
Navegue en línea o descargue pdf Manual del usuario para Módem Decima OKO. Decima OKO 20 páginas. Video modem
Imprimir páginaUSER'S GUIDE
button or select ―Connect‖ from menu ―Connection‖. If the connection is successful the
Click
program will display the ID No. of the video modem and prompt you to enter the password. To enter
the password you will have 15 seconds.
At the first switching on the password is absent, so, just press ―OK‖ button. The program will prompt
you to set the password, we recommend you to do it without any delay. Otherwise, press ―Cancel‖
button.
ATTENTION! It is strongly recommended to write the set password and keep it in a safe place.
If you loose the password, you will need to reboot the video modem and all the settings will be
lost!
Press
button located under the window of the first video channel (Fig. 2). After pressing this
button, there must appear an image from the video camera connected to socket ―1‖ of video input of
the video modem. If there is no any image in the window (black or blue background instead), check
and see the correct connection of the video camera and its operability in accordance with the available
instructions manual.
3.3 Setup connection:
If it is impossible to establish connection with the video modem (for example, through the fault of the
external modem used), you may make use of mandatory connection through the COM port of your
PC.
To do this, connect ―OKO‖ video modem using null modem cable to PC СОМ port, then select ―Setup
connection‖ command from ―Connection‖ menu.
After the establishing connection choose ―Settings‖ from ―Coder‖ menu, choose the correct settings
and issue the command to reboot the video modem.
Then connect in usual manner (see p. 3.2).
3.4 Adjustment of the coder settings.
3.4.1 Setting of the channel configuration:
Choose ―Settings‖ from ―Coder‖ menu. The dialog for adjustment of the main settings of the video
modem will appear on the screen, Fig. 3.
Enter the number of video channels (from 1 to 8), proposed to be used for monitoring, maximum width
and height of the snapshot. Progress bar ―Unused‖ gives the amount of the unused memory of the
video modem, which may be utilized for accumulation of video clips and photo pictures.
Fig. 3
2002 LLC "Decima"
VIDEO MODEM «OKO»
6