Decimator MD-QUAD Manual de instrucciones - Página 8
Navegue en línea o descargue pdf Manual de instrucciones para Accesorios Decimator MD-QUAD. Decimator MD-QUAD 8 páginas. 1 to 4 channel (3g/hd/sd)-sdi multi-viewer / quad-split with sdi and hdmi outputs
Imprimir página
GPI (General Purpose Inputs)
Configuration 0 (Tallies)
PIN
NAME
1
Q1_TALLY_EN
2
Q2_TALLY_EN
3
Q3_TALLY_EN
4
RX+
5
RX‐
6
Q4_TALLY_EN
7
OS_TOGGLE
8
GROUND
Configuration 1
PIN
NAME
1
Q1_PT_EN
2
Q2_PT_EN
3
Q3_PT_EN
4
RX+
5
RX‐
6
Q4_PT_EN
7
QS_EN
8
GROUND
Decimator Design warrants that this product will be free from defects in materials and workmanship for a
period of 36 months from the date of purchase. If this product proves to be defective within this warranty
period, Decimator Design, at its discretion, will either repair the defective product without charge for parts and
labour, or will provide a replacement product in exchange for the defective product.
In order to service under this warranty, you the Customer, must notify Decimator Design of the defect before
the expiration of the warranty period and make suitable arrangements for the performance of service. The
Customer shall be responsible for packaging and shipping the defective product to a designated service centre
nominated by Decimator Design, with shipping charges prepaid. Decimator Design shall pay for the return of
the product to the Customer if the shipment is to a location within the country in which the Decimator Design
service centre is located. The Customer shall be responsible for paying all shipping charges, insurance, duties,
taxes, and any other charges for products returned to any other location.
This warranty shall not apply to any defect, failure or damage caused by improper use or improper or
inadequate maintenance and care. Decimator Design shall not be obligated to furnish service under this
warranty a) to repair damage resulting from attempts by personnel other than Decimator Design
representatives to install, repair or service the product, b) to repair damage resulting from improper use or
connection to incompatible equipment, c) to repair any damage or malfunction caused by the use of non‐
Decimator Design parts or supplies, or d) to service a product that has been modified or integrated with other
products when the effect of such a modification or integration increases the time of difficulty of servicing the
product.
MD‐QUAD Hardware Manual for Firmware Version 2.0
Copyright © 2014 Decimator Design Pty Ltd, Sydney, Australia
E&OE
DESCRIPTION
Ground pin to enable Tally on input 1
Ground pin to enable Tally on input 2
Ground pin to enable Tally on input 3
RS422/RS485 Positive Receive Pin
RS422/RS485 Negative Receive Pin
Ground pin to enable Tally on input 4
Ground pin to toggle outputs between quad‐split and input 1, 2, 3 and 4.
Use as reference ground.
DESCRIPTION
Ground pin to enable pass‐through of input 1 to outputs.
Ground pin to enable pass‐through of input 2 to outputs.
Ground pin to enable pass‐through of input 3 to outputs.
RS422/RS485 Positive Receive Pin
RS422/RS485 Negative Receive Pin
Ground pin to enable pass‐through of input 4 to outputs.
Ground pin to enable Quad‐Split on outputs.
Use as reference ground.
SERVICE WARRANTY
7