Green Audio HDS 4X1 Manual del usuario - Página 14

Navegue en línea o descargue pdf Manual del usuario para Interruptor Green Audio HDS 4X1. Green Audio HDS 4X1 18 páginas. 4x1 hdmi switcher with arc

2. Power on the switcher and connect the switcher to the PC with USB cable. The PC will

automatically detect a U-disk named "BOOTDISK".

3. Double-click the U-disk. A file named "READY.TXT" will show.

4. Copy the user defined EDID (such as EC_11_720P_LPCM.bin) to the "BOOTDISK" U-disk.

5. Reopen the U-disk and verify the filename "READY.TXT" has updated and is renamed

"SUCCESS.TXT." If yes, the user defined EDID was imported into the switcher.

6. Repeat the above steps to copy additional user defined EDIDs to the "BOOTDISK" U-disk.

7. Remove the USB cable and power cycle the switcher.

8. Invoke the new EDID settings using the below switch settings.

Firmware Upgrade

The HDS 4X1 firmware can be upgraded using the below process. Please note you will need an upgraded copy

of the firmware from the factory prior to this procedure.

1. Prepare the latest upgrade file (.bin) and rename it "USERAPP.bin".

2. Power on the switcher and connect the switcher to the PC with USB cable. The PC will

automatically detect a U-disk named "BOOTDISK".

3. Double-click the U-disk. A file named "READY.TXT" will show.

4. Directly copy the latest upgrade file (.bin) to the "BOOTDISK" U-disk.

Switch Status

1011

1100

1101

1110

1111

GreenAudioMfg.com