Gamma Led Vision Starburst Versa Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Equipo para DJ Gamma Led Vision Starburst Versa. Gamma Led Vision Starburst Versa 18 páginas. 18x30w rgbwa+uv (6in1)

Imprimir página

fixtures together horizontally, align the grooves and connect the quick release pins on

each side for a seamless design.

4. Horizontal Hanging Installation: Using the Omega Brackets, each fixture should get 2

Omega brackets locked into the backside of the fixture. Then attach a clamp on each one

and you're now ready to horizontally hang the fixture.

Safety Precautions

Please keep this User Guide for future consultation. If you sell the unit to another user, be sure

that they also receive this instruction manual.

Caution: For added protection mount the fixtures in areas outside walking paths, seating areas, or in

areas were the fixture might be reached by unauthorized personnel.

Before mounting the fixture to any surface, make sure that the installation area can hold a minimum

point load of 10 items the device's weight.

Fixture installation must always be secured with a secondary safety attachment, such as an

appropriate safety cable.

Never stand directly below the device when mounting, removing, or servicing the fixture.

From a ceiling, or set on a flat level surface (see illustration below). Be sure this fixture is kept at

least 0.5m (1.5ft) away from any flammable materials (decoration etc.).

Always use and install the supplied safety cable as a safety measure to prevent accidental damage

and/or injury in the event the clamp fails.

DO NOT connect the device to any dimmer pack.

During initial start-up some smoke or smell may arise. This is a normal process and does not

necessarily mean that the device is defective, and it will decrease gradually within 15 minutes.

Don't try to modify the fixture without any instruction by the manufacturer.

Warranty is voided if there are any malfunctions from not following the user manual while operating

or any hazardous operation, like shock short circuit, electronic shock, lamp broken, etc.