Major MT 730 Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Instrumentos de medida Major MT 730. Major MT 730 16 páginas. Ac clamp meter

7. DC VOLTAGE MEASUREMENT

1. Set the function switch to

position. The meter automatically defaults to

DC Volts.

2. Insert the red test lead into the "V Ω

input terminal and the black lead to the "COM"

terminal.

3. Connect the other end of the test leads to the

circuit under test.

4. Read the display. If a "-" sign is displayed, the

red lead is the negative potential.

Note: • The meter is set to default to "Auto

Range" mode.

• Pressing the

allow the user to record the maximum

reading on the DC volt range. See page

13 for further instructions for "MAX" Hold

function.

__ __

_ _ _ _

hold button will

MAX

Battery

range