Major MT632 Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Termómetro Major MT632. Major MT632 8 páginas. Dual channel digital thermometer

Imprimir página
4.2. USING THE THERMOCOUPLE (S)
1. Plug the therrnocouple(s) into the T1 or T2 input connector(s).
2. Press
to turn on the thermometer. After 1 second the thermometer
displays the first reading. If no thermocouple is plugged into the
selected input or the thermocouple is "open," the display shows"- - - -".
4.3. CHANGING SETUP OPTIONS
Use Setup to change offset, sleep mode settings. The thermometer stores
the settings in its memory.
4.4. SETUP OPTIONS
Option
Menu item
Type
TYPE

Offset

OFFSET
Sleep Mode SLP
4.5. ENTERING OR EXITING SETUP
When the thermometer is in Setup mode, the display shows SETUP.
Press
to start or exit Setup.
4.6. CHANGING A SETUP OPTION
1. Press
or
to scroll to the setup option you want to change.
T1-T2
2. Press
to indicate that you want to change this setting.
3. Press
or
until the setting you want to use appears on the display.
T1-T2
4. Press
to store the new setting in memory.
Notes: Setup is disabled in MAX MIN mode .
5. OFFSET
The primary display shows the temperature plus the offset and the
secondary display shows the offset. You can store individual offsets
for T1, T2.

6. AUTO POWER OFF MODE

The thermometer enters sleep mode (default). That is to say, the meter
will automatically shut off after 20 minutes if no button press occurs for 20
minutes. When the thermometer is in Setup mode, the display shows
SETUP. Press
or
T1-T2
or "OFF". Press
or
display (fig.2). Press
mode on) or OFF (sleep mode off).
6
Settings
K or J
T1 or T2
(sleep mode on) or OFF
(sleep mode off)
to scroll to the"SLP" page . Press
until the setting you want to use appears on the
T1-T2
to store the new setting in memory. ON (sleep
to indicate "ON"