KitchenAid 30" (76.2 CM) WALL-MOUNT CANOPY RANGE HOOD Manual de instrucciones de instalación - Página 10

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Placa de cocción KitchenAid 30" (76.2 CM) WALL-MOUNT CANOPY RANGE HOOD. KitchenAid 30" (76.2 CM) WALL-MOUNT CANOPY RANGE HOOD 20 páginas. 30” (76.2cm) sealed burner gas slide-in range with self-cleaning thermal/convection oven
También para KitchenAid 30" (76.2 CM) WALL-MOUNT CANOPY RANGE HOOD: Manual de instrucciones de instalación (7 páginas)

Imprimir página

1. Electrical Requirements

3-Wire Cable from Home Power Supply to 4-Wire Cable

from Cooktop - U.S. only

IMPORTANT: Use the 3-wire cable from power supply where

local codes permit connecting the frame-ground conductor to

the neutral (white) junction box wire.

A. Cable from home power supply

B. Red wires

C. White wire and green (or bare)

wire (from cooktop)

D. 4-wire cable from cooktop

E. Junction box

1. Connect the 2 black wires together using the UL listed wire

connectors.

2. Connect the 2 red wires together using the UL listed wire

connectors.

3. Connect the green or bare and white cooktop cable wires to

the white (neutral) wire in the junction box using the UL listed

wire connectors.

4. Install junction box cover.

F. White wire

G. UL listed wire connector

H. Black wires

I. UL listed or CSA approved

conduit connector

Complete Installation

1. Check that all parts are now installed. If there is an extra part,

go back through the steps to see which step was skipped.

2. Check that you have all your tools.

3. Dispose of/recycle all packaging materials.

4. Use a mild solution of liquid household cleaner and warm

water to clean cooktop before use. Dry thoroughly with a soft

cloth. For more information, see the "Cooktop Care" section

of the Use and Care Guide.

5. Read "Cooktop Use" in the cooktop Use and Care Guide.

6. Reconnect power.

7. Use the Flow Tester Card provided with your cooktop to

check the airflow (see card for step-by-step instructions).

NOTE: If the cooktop does not work after turning on the power,

check that a circuit breaker has not tripped or a household fuse

has not blown. See "Troubleshooting" section in the Use and

Care Guide for further information.

If you need Assistance or Service:

Please reference the "Assistance or Service" section of the Use

and Care Guide or contact the dealer from whom you purchased

your cooktop.