Green Blue GB520 Manual - Página 3
Navegue en línea o descargue pdf Manual para Estación meteorológica Green Blue GB520. Green Blue GB520 14 páginas. Wireless home weather station
Imprimir páginaSnooze function: Press the SNOOZE/LIGHT button the alarm signal sounds to get to
SNOOZE mode. The alarm signal sounds again after approx. 5 minutes.
• Lunar phases and tide indicator: The Moon icon and tide indicator of the Weather
Station will also display 12 different Moon phase and 3 kinds of tide phases according to
the set calendar. • °C/°F temperature display: The temperature is displayed either in
°C/°F. Briefly pressing the °C /°F button allows you to switch between the individual
modes. • Comfort display: Indoor comfort level is calculated according to the indoor
temperature and humidity, a total of 5 levels. • Displaying temperature/ humidity/
pressure and temp/humidity trend: The current indoor temperature/humidity/barometric
pressure and the temperature/humidity trend (indoors) are shown in the LCD display •
After successfully connecting with the outdoor sensor, the weather station can display the
outdoor temperature/humidity and the temp. /humidity trend (outdoor) • You may see the
following displays: The temperature/humidity is rising. The temperature/humidity is
remaining constant. The temp./humidity is falling
• RF transmission procedure: The weather station automatically starts receiving
transmission from outdoor thermo sensor for outdoor temperature & humidity after
batteries inserted • The outdoor sensor will automatically transmit temperature and
humidity signal to the Weather Station after batteries inserted • Press the Down button to
select a channel (1 to 3). This gives you the option of polling 3 outdoor sensors with 1
weather station • If Weather Station failed to receive transmission from outdoor sensor
(- - display on the LCD), press and hold Down button for 3 seconds to receive transmission
manually. RF icon flashes on the LCD, The Weather Station to receive the outdoor sensor.
Maximum/minimum temperature/relative humidity • To toggle indoor/outdoor
maximum, minimum temperature and humidity data, press the "MEM" button: Once to
show the maximum temperature and humidity values. Twice to sow the min. temperature
and humidity values. Three times to return to the current temperature and humidity levels.
To reset the maximum and minimum temperature and humidity, press and hold down the
"MEM" button about 2 seconds. This will reset all minimum and maximum data recorded
to the current displayed values F.Y.I: If the temperature reading is below ranges, the LL.L
will be displayed. If the temperature reading is above ranges, the HH.H will be displayed.
OUTDOOR TEMPERATURE ALERT SETTING: Press and hold down the ALERT button for 2
seconds until the icon for the Temperature Alert" starts to flash • The icon of Upper limit of
the Temperature alarm starts to flash. Use the Up and Down buttons to set the required
maximum temperature. Press ALERT to confirm your setting • The icon of the Lower limit
of the Temperature alarm starts to flash. Use the Up and Down buttons to set the required
minimum temperature. Press "ALERT" button to confirm your setting and to end the setting
procedure. F.Y.I.: Before entering the setup, you must select the outdoor channel, different
channels can set different temperature alarm range
Temperature and frost alert: Activate and deactivating the temperature alert or frost
- 04 -
alert: Briefly press "ALERT" button to activate or deactivate the temperature alert • If the
frost alarm alert is activated, the corresponding symbol appears next to the outdoor
temperature. The alarm signal sounds at –1℃ to + 3°C ℃ or +30℉ to + 37℉°F • If the
temperature alarm is activated, the corresponding symbol appears next to the outdoor
temperature. The alarm signal sounds at the set values • If the temperature and frost
alarm are activated, both symbols appear in the display F.Y.I.: If the temperature reading is
below ranges, the LL.L will be displayed. If the temperature reading is above ranges, the
HH.H will be displayed.
HPA/INHG pressure display: The pressure is displayed either in HPA/INHG. Briefly
pressing the "HPA/INHG" button allows you to switch between the individual modes.
Preparing to use the weather forecasting function. Note: Please take the weather forecast
from your local weather forecasting service into account as well as the forecast from your
weather station. If there are discrepancies between the information from your device and
from the local weather forecasting service, please take the advice of the latter as
authoritative • The weather forecast is calculated from evaluation of fluctuations in the
barometric pressure and may deviate from the actual weather conditions • The weather
station displays the following weather symbols: sunny, slightly cloudy, cloudy, rainy, heavy
rainy, snowy • The weather symbols indicate the weather fluctuation over the next eight
hours and not the current weather • The weather station can display the barometric
pressure trend • You may see the following displays: The barometric pressure will rise.
The barometric pressure will remain constant. The barometric pressure will fall.
BACKGROUND LIGHTING When using the battery power supply, Press the SNOOZE/LIGHT
button, the backlight illuminates for 15 seconds • When using the DC-POWER power
supply, The backlight will not be extinguished • Product back of the Backlight shift switch
is pushed in the HI position, the brightness of the backlight brightness high brightness
• Product back of the BACKLIGHT shift switch is pushed in the LO position, the brightness
of the backlight brightness low brightness USB CHARGER: Products behind the USB
socket, as a DC 5V-1A charging power supply, to provide handheld mobile devices
Pl
Bezprzewodowa Domowa Stacja Pogodowa
01. CECHY: Funkcja radiowego aktualizowania czasu DCF • Kalendarz do roku 2099
• Dni tygodnia do wyboru w 7 językach: angielski, niemiecki, włoski, francuski, hiszpański,
holenderski i duński • Czas opcjonalny w formacie 12/24 godzinnym • Dzienne funkcje
alarmu • Automatyczna funkcja drzemki • Wyświetlanie fazy księżyca i przypływów
• Wyświetlanie ciśnienia barometrycznego: zakresy pomiaru ciśnienia barometrycznego:
600-1100 hPa/mb i 17.72-32.50 inHg • Ciśnienie na przemian w hPa/mb lub Hg
• Histogram pokazuje średnią 24-godzinną ciśnienia atmosferycznego • Wilgotność:
Wewnętrzna i zewnętrzna: mierzalny zakres: 20%-95% RH • Pomiar temperatury:
wewnątrz: 0/50°C (32/122°F) • Na zewnątrz -20/60°C (-4/140°F) • Temperatura
GB520
-05-