Major Manufacturing HIT-66-274 Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Torno Major Manufacturing HIT-66-274. Major Manufacturing HIT-66-274 10 páginas. Template for sargent “in” series cylindrical lock

Imprimir página

With both clamps opened equally,

install both inside and outside

templates to the HIT-66 clamp as

shown. Do not tighten the 10-32

screws at this time. When all

screws have been loosely

installed, then it is ok to tighten.

NOTE: The HIT-66 clamps

shown are not part of the

HIT-66-274 template set and

must be purchased as a

separate item.

Install the drill guide for latch and

optional external DPS to the front of

the HIT-66 clamps as shown. Do not

tighten the 1/4-20 screws at this time.

When all screws have been loosely

installed, then it is ok to tighten.

Install the "U" shaped alignment

guide to either side of the

template set. This is used to

align the template with the

cylindrical latch when retrofitting.

PAGE 3