Major tech MT775 Manual de instrucciones - Página 5
Navegue en línea o descargue pdf Manual de instrucciones para Instrumentos de medida Major tech MT775. Major tech MT775 20 páginas. Ac/dc trms clamp meter
También para Major tech MT775: Manual de instrucciones (16 páginas)
Imprimir página
Before making measurements ensure that the
!
function selector switch is set on the
appropriate range position.
Always make sure that the plug of each test
!
lead is inserted fully into the appropriate
terminal of the meter.
Ensure that the function selector switch is set
!
to the "OFF" position after use. When the
meter will not be in use for a long period of
time, place it in storage after removing the
battery.
Do not expose the meter to direct sunlight,
!
extreme temperatures or moisture.
Do not use abrasives or solvents on the meter.
!
To clean it use a damp cloth and mild
detergent only.
Qualified and trained service technicians should
only perform calibration and repair of the meter.
3. FEATURES
True RMS measurement of AC Current and
!
AC Voltage
Large 4000 count LCD display with bargraph
!
and a bright white LED backlight.
Wide measuring range from 0.01A AC up to
!
1000A AC
Measures AC and DC Voltage up to 600 volts
!
Measures resistance from 0.01Ω up to 40MΩ.
!
Capacitance measurements up to 40mF
!
Temperature measurement from -40ºC to
!
+1000ºC and -40ºF to +1832ºF.
Designed to the international safety standard
!
IEC61010 CAT lll 600V / CAT ll 1000V,
Pollution degree 2.
Auto Power Off after approximately 20
!
minutes to conserve battery life.
Continuity Buzzer and Diode Test
!
Frequency measurement up to 4kHz
!
Peak Hold to record the minimum and
!
maximum readings for current and voltage.
Data Hold switch used to freeze reading on
!
display
4
! !
CAUTION