Major tech MT785 Manual - Página 17

Navegue en línea o descargue pdf Manual para Instrumentos de medida Major tech MT785. Major tech MT785 20 páginas. 1000 a ac/dc trms power clamp meter true rms
También para Major tech MT785: Manual del usuario (7 páginas)

Imprimir página

INRUSH

NOTE: Only AC A functions can do the INRUSH value measurement.

Switch off motor and then clamp supply.

Press the INRUSH button , "----"will appear in the display.

Start motor and then read the value on the display.

Data Hold

To freeze the LCD reading, press the HOLD button. While data hold is active,

the HOLD icon appears on the LCD. Press the HOLD button again to return

to normal operation.

MAX/MIN

Press MAX/IN key the maximum and minimum values are measured.

This mode is activated on each measurement except for continuity test,

diode test capacitance test, frequency test and duty cycle test.

This mode is disabled keeping pressed MAX/MIN key or moving the

rotary switch.

Flash Light Button

Press the Flash light button to turn the flash light on. Press again to turn

the flash light off.

LCD Backlight Button

The LCD is equipped with backlighting for easier viewing, especially in

dimly lit areas. Press the backlight button to turn the backlight on. Press

again to turn the backlight off. Note that the meter does have an auto

power off feature as described below.

Bluetooth

Bluetooth Off: Bluetooth logo is not displayed on the screen

Bluetooth On: Bluetooth logo is displayed on screen

Hold down the mode button to select the bluetooth function

Automatic Power OFF

In order to conserve battery life, the meter will automatically turn off

after approximately 15 minutes. To turn the meter on again, turn the

function switch to the OFF position and then to the desired function

position.