Decko 136-5080 Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Mobiliario interior Decko 136-5080. Decko 136-5080 2 páginas. Side panels

Step 1 Assembly

The side panels can be assembled to any desired

level on the racking system. Beams must be

spaced exactly 12 slots apart in order for the

panels to function properly.

Step 3 Assembly

Attach one bracket (C) to each of the four corners

of the side panels (A) using two screws (B) two

washer (B) and two nuts (B). Once all four brackets

are installed, tighten the brackets with a wrench

and Phillips screw driver to secure.

Repeat steps 1,2,3 to install the second side panel (A)

Beams must be

spaced 12 slots.

Tools Needed:

1. Phillips head screw driver.

2. Crescent wrench or 8mm Wrench.

Step 2 Assembly

From the top, slide one side panel (A) between the

beams and the end frames. Line up all holes with

the center of the beams. If the holes are not

in-line, the racking beams are incorrectly spaced

and will need to be re-adjusted.

Parts List

Two

Side Panels

Eight

Brackets

Line up holes with

center of beam

Beam

Sixteen Screws

Sixteen Nuts

Sixteen Washers