Major tech MT945 Manual de instrucciones - Página 7
Navegue en línea o descargue pdf Manual de instrucciones para Instrumentos de medida Major tech MT945. Major tech MT945 12 páginas. Hot wire thermo anemometer
Imprimir página4.5. Area Setting
Changing the number digits of area and change the number value of area.
Press "Unit
" or "Unit
" to scroll to the area value setup option
when the thermometer is in the setup mode. Press "Enter" button, the
area number flashes. Press "Unit
" or "Unit
" to scroll to digit that
you want to change (refer Fig.3).
Press "Enter", the screen indicate that area number with a flashing digit.
Press "Unit " or "Unit " to change the flashing digit from 0 to 9. Press
"Mean" to change the station of flashing digit and press "Unit
" or
"Unit
" to change the number, the adjust order is from
right to left. Press "Enter" to store the new area in memory.
4.6. Auto Power Off Mode
The thermometer enters sleep mode (default). That is to say, the meter
will automatically shut off after 20 minutes if no button press occurs for
20 minutes.
When the thermometer is in Setup mode, the display shows SETUP. Press
"Unit
" or "Unit
" to scroll to the "SLP" page. Press "Enter" to
indicate "On"
or "OFF". Press "Unit
" or "Unit
" until the setting you want to use
appears on the display. Press "Enter" to store the new setting in
memory. On (sleep mode on) or OFF (sleep mode off).
7