Decko 82004 Instrucciones de montaje y cuidado

Navegue en línea o descargue pdf Instrucciones de montaje y cuidado para Mobiliario interior Decko 82004. Decko 82004 2 páginas. Adirondack chair

Imprimir página
CARE & MAINTENACE
FINISHING TIPS (For unfinished wood)
Your Decko Woods furniture is made from high quality, select grade fir. It is naturally resistant to
rot and decay. Proper finishing will help assure the beauty and durability of your chair. If you
choose to paint your chair, you should use an exterior grade primer followed by a high quality
exterior oil or latex based paint. If you choose to have the product retain its natural color, you
should apply a natural oil-based stain or preservative annually or as needed. When finishing,
make sure you also treat the ends of the wood parts that come in contact with the ground.
If you leave the chair without adding any finish, it will weather to a silver gray color.
Contact your local paint store, home center or hardware store for other finishing
recommendations.
MAINTENANCE
Very little maintenance is required for your furniture. Periodically check all fasteners to make
sure they are properly secured. Re-tighten if necessary.
MANUFACTURER'S LIMITED WARRANTY
This product is covered under the manufacturer's 1 year limited warranty against defect in
workmanship and materials. If your furniture fails structurally during normal use within on year of
purchase, the manufacturer will repair or replace the defective piece at no charge.
The warranty excludes furniture used for commercial purposes, furniture damaged by acts of
nature, abuse or lack of proper care or corrosion or rusting of hardware.
Proof of purchase (dated register receipt) is required for warranty claims.
Decko Products
2301 Traffic St. NE
Minneapolis, MN 55413
1-800-495-9278
ADIRONDACK CHAIR ASSEMBLY AND CARE INSTRUCTIONS
Thank You for your purchase of a finely
crafted piece of furniture from Decko Woods.
The
following
contains
instructions
assembly as well as care and maintenance
instructions.
Please take a moment to
completely read and familiarize yourself with
this information.
You will then be ready to
assemble your furniture.
If you have any
questions regarding your purchase, please
contact us at 1-800-495-9278
Tools Needed:
-Phillips Head Screwdriver
-Adjustable wrench
NOTE: It is NOT recommended to use power
tools for assembly.
They may cause over
tightening and damage to your chair.
NOTE: Diagrams are not drawn to scale. Construction in diagrams may differ from actual chair.
A
B
C
E
For Model# 82004
for
Parts List & Hardware
Item
Qty
Description
A
1
Back Assembly
B
1
Seat Assembly
C
1
Left Leg
D
1
Left Arm
E
1
Right Leg
F
1
Right Arm
G
2
Back Supports
H
10
Machine Screw 6 x 50 mm
I
10
Washer - 6mm
J
10
Nut - 6mm
M
10
Wood Screw - 4mm x 40mm
K
2
Wood Screw 5 x 60mm
D
H
F
I
G
K
J
M