Centurion SDO-10 Instrucciones de instalación y manual de usuario - Página 15
Navegue en línea o descargue pdf Instrucciones de instalación y manual de usuario para Abrepuertas de garaje Centurion SDO-10. Centurion SDO-10 19 páginas. Sectional and tilting door opener
19. Learn Button
The Learn button (Fig 11) is located on the rear cover of the AGDO and serves to initiate the functions as
described in the following table;
Function
Learn Hand Transmitter Codes
Delete Hand Transmitter Codes
Entering SOF Adjustment Mode
20. LED Indicator
The LED Indicator (Fig 11) is located on the rear cover of the AGDO and serves to provide visual
indication of functionality sequences as described in the following table;
Display
Glow Solid
Slow Flash
Medium Flash
Quick Flash
None
21. Output Terminals
4 Output Terminals (Fig.11) are provided within the back cover of the AGDO to support the connection
of the following accessories;
a. Genuine 2 wire Safety Beams (Fig 12A)
b. 24VDC universal receiver (Fig 12B)
c. Normally open momentary contact Wall Switch (Fig 12)
Fig 12A
22. Run Button
The Run button (Fig.11) is located on the rear cover of the AGDO and serves to initiate the following
functions;
Function
Activate AGDO
Safety Beam override
23. Safety Beams
Genuine 2 wire Safety Beams may be connected to the AGDO.
The installation of Safety Beams greatly enhances safety by constantly monitoring for persons or objects
that might pass within the path of the moving garage door. The AGDO will commence to safety reverse if
the Safety Beams become momentarily or permanently interrupted while the garage door is closing.
OPTIONS AND FEATURES
Action
Momentary press
Press and hold while powering-up
Press and hold for 2 sec.
Indicator
Reached door closed position
Reached door open position
Learning or deleting Hand Transmitter codes
Force adjust mode activated
AGDO is traveling between open and closed positions
Fig 12B
Action
Momentary press
Press and hold until garage door is fully closed
- 15 -
Reference
Sec.15
Sec.15
Sec.14
Fig 12C
SDOPD