Major tech MT123 Manual de instrucciones - Página 3
Navegue en línea o descargue pdf Manual de instrucciones para Equipos de prueba Major tech MT123. Major tech MT123 4 páginas. Magnetic solenoid tester
Imprimir página4. Operating Instructions
Use your know test magnet and move it to the probe, which shall then
light. If the test lamp does not light - change the batteries.
1. First check the batteries according to the "functions check" instruction
above.
2. Just touch the test object with the Magnet Tester probe. If the lamp
lights, the object is electrically activated.
3. It is not necessary to unscrew the test object from its mounting on
the equipment in order to carry out the test - a magnetic coil can even
be tested through its protection cover.
4. It is not necessary to stop the machinery or the equipment in order to
carry out the test.
5. Sometimes stray magnetic fields from other nearby equipment may
cause the test lamp to blink momentarily. Close to an activated
magnetic coil, however the test lamp will give a fixed light.
6. Hold down the test button, placing the tip of the unit near a magnet
field. The meter will produce a steady red glow at the tip.
7. Hold down the red button for the flashlight to turn on. Remove your
finger to turn flashlight off.
5. Battery Replacement
When the battery voltage drops below 2 volts, the meter provides a
visual indication by stopping the VoltBeat flash. batteries. Slide the
battery cover and remove the batteries. Replace with 2 AAA. Make sure
the battery cover is secure after changing the batteries.
NOTE: If you will not use the meter for a long period of time, remove the
batteries.