Centurion SMARTGUARD Manual de instalación - Página 9
Navegue en línea o descargue pdf Manual de instalación para Pasarela Centurion SMARTGUARD. Centurion SMARTGUARD 12 páginas.
Imprimir página
External wiring cable route
Cable
17. Fitting the anti-tamper switch
If the onboard terminals are used to connect the anti-
tamper switch, the switch's normally-closed (N/C) and
common connections MUST be used. Normally-closed (N/C)
will be connected to In1 and COM to Neg (-)
If the anti-tamper switch is to be connected to a third-party
alarm system, either normally-closed or normally-open can
be used, along with a common connection
Onboard alarm option -
activates Alarm Channel
(Channel 3)
OR
To third party
alarm system
18. Typical connection diagram
If your supply voltage to the SMARTGUARD exceeds
24V AC or 30V DC, fit the supplied 150R resistor in
series with the supply wire as shown.
From external
12V - 24V DC/AC
power supply
To other
equipment
Resistor
Free
exit
1
2 3 4 5 6
Gooseneck cable route
Door
strike
7
8 9
Cable
Knockout
tab
220V
12V AC
AC