Gammill PLUS Manual - Página 3
Navegue en línea o descargue pdf Manual para Máquina de coser Gammill PLUS. Gammill PLUS 12 páginas.
Imprimir páginaThe Gammill Plus Control Center is
a custom designed, state of the art
stitch regulator system for quilting
machines. The system provides two
basic operational modes, Manual
(constant motor speed) and
Automatic (regulated stitch).
Some features of Plus Stitch
Regulation are:
• Sensors and alerts for top thread
break and/or low bobbin thread.
• Switch selectable ½ stitch and full
stitch operations are available in
either manual or automatic mode.
• Dual Liquid Crystal Display (LCD)
units to operate the sewing head
from either front or back.
• Dual channel locks (horizontal
and vertical) that can be enabled
or disabled while sewing.
• Needle position function to set
the needle to stop in the up or
down position.
• Safety feature in automatic mode
whereby the motor shuts off
automatically if the machine is
not moved within five seconds.
Controls
A Plus Control Center display unit is
located on both the front and back of
the machine. Each consists of a 4-
line LCD display, several push
button switches, and one toggle
switch on the left side. In addition to
the display unit, there are two
buttons on the ends of the machine
handles. The left handle has the
black Needle Position (NP) switch
Plus™ Stitch Regulation
and the right handle has the red
Run/Stop (RS) switch.
The buttons on the front of the
display unit include:
1
Enables or disables the
Left/Right (horizontal) channel
H
lock
Enables or disables the
Front/Back (vertical) channel
V
lock
Selects automatic (stitch
A
regulation) mode
Selects manual (constant
M
speed) mode
Increases stitches per inch or
+
motor speed
Decreases stitches per inch or
-
motor speed