CenturionPro Original Manual del usuario - Página 14
Navegue en línea o descargue pdf Manual del usuario para Recortadora CenturionPro Original. CenturionPro Original 20 páginas.
Imprimir página
MACHINE MAINTENANCE
The Originals's and Silver Bullet's are precision machines. It is essential that they be operated and maintained with this in mind. The machine has been adjusted and tested by the
manufacturer prior to shipping to ensure optimal performance. However, it is important to inspect the machine at initial start-up and after each use to ensure that no damage or plant
material build-up has occurred and that the blades spin freely.
In addition, it is highly recommended to clean the machine after every day of use. This ensures that the blades are kept lubricated and that resin does not build-up and affect performance.
This is especially important if the machine has been stored for an extended period of time.
Cold water is recommended to spray on blades during harvest. If optional Quantanium coating is chosen, the machine will not require any lubricants or sprays. The application of which will
only damage or alter the final product and will not assist with the cutting process. In fact, it may hinder it.
TRIM BOTH WET + DRY
ELECTROPOLISHED
DUAL-PURPOSE
HYBRID TUMBLER
TRIMMING DRY?
HERE ARE SOME IMPORTANT TIPS!
• Begin by hanging the entire plant, leaving the leaf on. Starting with 30% humidity at 60-65 degrees Fahrenheit for 24 hours, raising the humidity to 50-60% for another five to six days.
• Next, carefully cut all your flowers off the main stocks of the plant, leaving only flowers and leaves in tact. Then, depending on the density of the flowers, it should be ready to run through the machine.
• The buds should be about 80-90% dry, which allow the fan leaf and sugar leaf to remain somewhat PLIABLE/BENDY, in a soft and flexible state. If the larger leaf is too dry and brittle (which makes
it more difficult for the machine to pull this stiffer leaf through the slots of the drum, preventing a clean, sharp cut) raise the humidity up to 75% for about half a day to a full day. This, remarkably,
softens up the unwanted leaf while returning almost no additional moisture to the main body of the buds.
CRITICAL:
IT IS CRITICAL FOR THE UNWANTED LEAVES TO BE
PREFORM A CLEAN PERFECT CUT. WE ALSO RECOMMEND USING A
BOTTLE
WITH A MISTING NOZZLE TO RE-INTRODUCE A SMALL AMOUNT OF MOISTURE TO THE
UNWANTED LEAVES BEFORE RUNNING THE FLOWERS THROUGH THE MACHINE.
After running the buds through the machine the chances are they are ready to bag up! All that might be necessary is a quick test after the bag has been sealed by opening it back up to air them out a
bit to achieve the perfect moisture content (curing process). You may prefer to run the machine with the plastic cover off, and diverter almost open (this varies depending on the density of the strain).
Please note the machine operates best when the tumbler is 40-60% full. A huge bonus to the DRY trimming method is that the machine will require almost no periodic cleaning, as the tumblers and
blades will not gum up and therefore not reduce performance. The main advantage of DRY trimming is said to be better preservation of all the strong natural aromas and flavours after the harvesting
process is complete.
MONTHS OF WORK CAN BE RUINED IN A FEW HOURS AT THE END SO PLEASE BE PATIENT AND TAKE YOUR TIME WITH THE HARVESTING AND CURING PROCESS.
14
1 855 535 0558
CENTURIONPRO
DUAL-PURPOSE HYBRID TUMBLER
DESIGNED FOR BOTH WET + DRY TRIMMING
All CenturionPro trimming machines are specially designed to trim both wet and
dry material better than any other machine on the market. Our Dual-Purpose
Hybrid Tumbler has been extensively tested to outperform both the traditional wet
tumbler when trimming wet and the traditional dry tumbler when trimming dry.
This CenturionPro innovation allows you to switch between wet and dry material.
This is a major benefit because you can purchase one machine and still have the
capability to trim wet or dry flowers.
See our dry trimming tips below for more details.
SOFT AND BENDY
FOR THIS MACHINE TO
HUMIDIFIER OR A WATER
cprosolutions.com
NOTE 1:
THIS METHOD WILL ALLOW VIRTUALLY NO ADDITIONAL
MOISTURE BACK TO THE INNER BUD/FLOWER. THE
MOISTURE WILL ONLY SOFTEN UP THE OUTER LEAVES.
NOTE 2:
THE LEAVES MUST BE SOFT AND
PLIABLE FOR THE DRY TRIMMER TO
BE EFFECTIVE.