Jam Transit Touch HX-HP910 Manual del usuario e información sobre la garantía - Página 2
Navegue en línea o descargue pdf Manual del usuario e información sobre la garantía para Auriculares Jam Transit Touch HX-HP910. Jam Transit Touch HX-HP910 3 páginas. Wireless headphones
Imprimir página
BLUETOOTH
CONNECTION, CONTINUED
®
3. Do whatever your device needs you to do on its end.
4. Look for JAM Transit Touch Headphones in your device's
Bluetooth list or click YES.
5. Now hit PLAY on your headphones and crank it up — or down if
you're lame.
The device and Bluetooth will find each other every time, as long as
the headphones are set to Bluetooth and your device's Bluetooth is,
you know, on.
If you're connecting to a computer, you may have some extra steps
on that end. You'll have to get that information from the computer
company.
Depending on your device, you may be prompted to enter a pairing
code. If prompted, enter "0000" as the code.
To disable pairing of an existing device and pair a new device, tap
and hold the touchpad for 6 seconds to activate pairing mode.
Note: If you turn on your Transit Touch Headphones but haven't
started the party yet, they will automatically power off after 2 minutes
of unpaired inactivity.
Note: Once paired, if you pause the party for 15 minutes or more,
your headphones will automatically power off to preserve battery life.
HOOKING UP OLD-SCHOOL AUDIO, JACK
1. Plug one end of the cord into the headphones
and the other into the headphone jack on
your device.
2. Turn on the headphones.
3. Hit PLAY on your device and crank it up — or
down if you're lame.
You'll have to play and pause the music from
your device, not your headphones. No problem.
You're there anyway, right?
LOOK MA, NO HANDS!
When friends call to interrupt your party of one — and you know they will — answer the phone without disconnecting from your JAM
Transit Touch. Yes, that's right. Your headphones have hands-free calling, too. How amazing is that? Here's how it works:
1. Make sure your phone and headphones are connected through Bluetooth.
2. Answering and ending a call works the same way: simply tap the touchpad on your Transit Touch.
3. If you'd rather not talk, tap and hold the touchpad on your Transit Touch for 3 seconds to ignore the call.
THE COOLEST PART: The Transit Touch knows when a call is coming in and pauses the music before ringing. When you hang up, the
music starts where it left off — and so does the party. If it's you making the call, just start dialing from your phone, and the Transit
Touch automatically does its hands-free thing. Isn't it refreshing to know your headphones totally get you?
Check out the chart below for a complete guide on handling calls with your Transit Touch.
Situation
1
Incoming call
st
On call
2
Incoming call
nd
Both calls active
1 YEAR LIMITED WARRANTY
For detailed warranty instructions and information visit:
USA:
www.jamaudio.com/customer-support/warranty-1yr
CAN:
canada.jamaudio.com/warranty-1yr
Short Tap Touchpad
Pick up call
End call
Call 1 on hold, pick up call 2
Hang up call 1, switch to call 2
To obtain warranty service on your JAM product, contact a
Consumer Relations representative by telephone or email for
assistance (you can find their contact info on page 1). Please
make sure to have the model number of the product available.
Bluetooth
®
on
Enter Code:
Devices
0 0 0 0
>
JAM Transit Touch
2m
COMING CLEAN
A soft, dry towel is all you need to
clean off your headphones. Using
water, harsh cleaners, or anything else
only starts messing with the mechanics
inside. So, yeah, don't do it.
Long Tap Touchpad
Reject call
Move call from headphones to device
Reject call 2
Switch between call 1 and call 2
15m