IKEA BCF228/64 Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Frigorífico IKEA BCF228/64. IKEA BCF228/64 24 páginas. Frostig
También para IKEA BCF228/64: Manual de montaje (20 páginas)

Imprimir página

ENGLISH

Fan Function

The function is activated by pressing the

Function button (several times if necessary)

until the corresponding icon appears .

In this condition the fan works continuosly.

It is possible to deactivate the function at any

time by pressing the Function button until the

icon

goes out of view.

Important! If the function is activated

automatically the fan icon is not shown (refer

to "Daily use").

The activation of the fan function increases

the energy consumption.

Action Freeze Function

To freeze fresh foods, you will need to acti-

vate the Action Freeze function. Press Func-

tion button (several times if necessary) until

the corresponding icon appears.

This function stops automatically after 52

hours.

It is possible to deactivate the function at any

time by pressing Function button (refer to

"Functions Menu").

Excessive temperature alarm

An increase in the temperature in the freezer

compartment (for example due to a power

failure) is indicated by:

First use

Cleaning the interior

Before using the appliance for the first time,

wash the interior and all internal accessories

with lukewarm water and some neutral soap

so as to remove the typical smell of a brand-

new product, then dry thoroughly.

• flashing temperature

• freezer compartment flashing (Freezer

compartment indicator / Door open alarm

indicator)

• red illumination of display

• sounding of buzzer

When normal conditions are restored:

• the acoustic signal shuts off

• the temperature value continues to flash

• the display illumination remains red.

When you press Function button / Alarm re-

set switch to deactivate the alarm, the high-

est temperature reached in the compartment

appears on indicator

At this point the flashing stops and the dis-

play illumination changes over from red to

white.

During the alarm, the buzzer can be switched

off by pressing Function button / Alarm reset

switch.

The illumination of the display remains red

until normal storage conditions are restored.

Important! Do not use detergents or abra-

sive powders, as these will damage the finish.

for some seconds.