Gana GN-708VN Manual del usuario - Página 13

Navegue en línea o descargue pdf Manual del usuario para DVR Gana GN-708VN. Gana GN-708VN 19 páginas. 4ch stand alone dvr with network

Imprimir página

IV. How to use

○

Time Set

where supply service manages to run server.

If synchronize by NTP server, to synchronize the time, press 'yes' on "

synchronizing to server", then DVR will synchronize the time in every minute

automatically. (Must use NTP IP address)

○

Event list

Before mentioned, if you press list button, it will execute same as

appearing event list (page 8 reference).

○

Network Settings

User opt, use above, with these technical capacity, be able to remote-control,

monitor DVR though network joining.

Time zone is sorted by each country.

◄, ►- moving cursor

▲, ▼- changing value

After set the time, press "apply"

If this DVR is connected on internet network,

you

can

update

automatically

synchronizing through NTP server. You can

set up server address with these keys ◄,►,

▲, ▼

NTP (Network Time Protocol) perform to

synchronize time, the company or website

At EHERNET port, Connect network cable to

router or internet, then select yes on network

setting.

First of all, to use the remote controlling

network function, it is advised to connect

DVR and PC, then to install viewer software

into

which

provided

manufacturer. User should allocate IP

address of TCP/IP structure

fitted with

Window OS according to prescribed rule,

then affiliate (join) to local IP. If there is a

Name server, the content should be inputted

together, Also, the password should be

same on Viewer software in PC and DVR.

The resolution is selectable, Very High, High,

Standard, Low, Very Low.

The present DVR services 3 diverse network

joining modes.

1. STATIC, 2. DHCP for dynamic IP, 3.

PPPoE

IV. How to use

○

F/W Upgrade

be held responsible for program malfunction when user upgrade themselves. (We

are not recommend upgrade without serious system problem.)

8) Search

Implementation function equivalent front panel or PLAY/PAUSE button.(

page 9 by comparison )

9) Language

the

10) Exit

You can upgrade Firmware by inter con-

necting USB to DVR after duplicating the file

furnished by the manufacturer. Pressing

button, you should identify whether there is

new substance or not, then, advance up-

grade conformably to a scene.

. After completion of the Firmware upgrade

and reboot, it processes to execute in new

setup.

* Caution : Manufacturer or Supplier Shall not

You can opt OSD (on screen display)

language. General language furnished

are English, we are prepared to pro-

duce Korean, Japanese and Chinese

versions. So you are advised to confirm

which language is supported in pack-

age before purchasing.

User should apply settled figure. 'close

after

save',

'close

after

unsaved',

'settled figure default', among these

three, select by ▲, ▼ then, apply by

►.