Gandalf SD15 Manual de instrucciones

Navegue en línea o descargue pdf Manual de instrucciones para Antena Gandalf SD15. Gandalf SD15 1 páginas. Grid antenna

By purchasing this antenna you've got a reliable amplifier for your sender/receiver setup. Without any

generating any noise this antenna amplifies for receiving as for sending. For transportational purpose

this antenna will be supplied in several parts. For assembling no tools are needed.

The antenna consists out of the following parts:

1. Grid reflector

5. Wing nuts (5x)

Preparation

Before you start assembling the antenna it's advisable to attach the cable to the antenna first. Now it's

easy to protect the connection with self vulcanizing tape (7). This is very important for the long life

span of the antenna set up.

Assembling the antenna

Put the 4 long bolts through the holes in the

Mount the antenna with the bolts and brackets

Horizontal polarized

Instruction manual grid antenna

2. Dipole

6. Short bolt

Step 2

assembly plate.

to a tube or pole.

Vertical polarized

3. Pole brackets (4x)

7. Self vulcanizing tape

Step 1

Attach the white feed element (dipole) to the grid

reflector. Make sure that the cable leads through the

hole in the middle of the grid reflector.

The bended corners of the dipole back plate should

be positioned exactly around the metal wires of the

grid reflector.

The back plate is locked to the grid reflector with the

short bolt and a wing nut.

important, antenna's on both side's of a radio

connection must be equally polarized.

The antenna can be polarize horizontal or vertical.

Polarization can easily be set by installing the

antenna in a horizontal or a vertical position.

4. Long bolts(4x)

8. This manual