Gandy 24H13 Manual de piezas y montaje - Página 10
Navegue en línea o descargue pdf Manual de piezas y montaje para Esparcidor Gandy 24H13. Gandy 24H13 19 páginas. 24-inch variable rate spreader
También para Gandy 24H13: Manual del usuario (8 páginas), Manual del usuario (8 páginas), Manual del usuario (10 páginas)
Imprimir página
Step# 8
(Mount Tube to Hopper Assembly)
1.
Note: Lay something down (piece of cardboard or blanket) to protect hopper from being scratched up.
Lay hopper on its side so the cam gauge is up & pivot the spread plate down out of the way as shown in
Diagram #19.
2.
Remove the 5/16" flange nut from the stud above and to the right of the cam gauge as shown
in Diagram #19.
3.
Attach the mount tube with shut-off rod in place to the 5/16" stud & re-use the 5/16" flange nut.
Make sure the end of the shut-off lever goes into the U-notch as shown in Diagram #20.
Do not tighten, leave nut loose.
Diagram #19
Diagram #20
Page 10 of 19
2824-A2