Decolav JORDAN MODULAR 1666 Manual - Página 9

Navegue en línea o descargue pdf Manual para Mobiliario interior Decolav JORDAN MODULAR 1666. Decolav JORDAN MODULAR 1666 11 páginas.

INSTALLING THE TOP TO THE VANITY

Step #1

o With the vanity in the desired location Place a small bead of silicone to the areas shown in Figure G.

o Carefully lower top into position. There will be approximately 1/4 inch of top overhang on either side of

the top. Back of top should be aginst the wall

o Apply a bead of silicone to the bottom edge of the backsplash and to the back of the backsplash.

Apply backsplash to the back of the vanity top and the wall.

o Let Silicone Cure per manufactures specifi cation before using.

Apply a Small Amount of Silicone to the

areas shown

INSTALLING THE TOP ON THE VANITY CONSOLE/ VANITY DRAWER

Step #1

o Apply a small amount of Silicone to the areas shown. Figure I

o Because of the decorative moulding that is directlly below the Vanity top the Drawer Console top and the

Vanity drawer top must be slid in from the front. See Figure I

o The back edge of the Vanity drawer and Drawer Console should be fl ush with the back of the Vanity Drawer

chassis and the back of the Drawer console Chassis

Apply a Small Amount of Silcone

to the areas shown

Vanity Drawer

Vanity Drawer Top

Figure I

Customer Service: 561-274-2110

www.decolav.com

JORDAN MODULAR SERIES

Backsplash

Vanity Top

Use Silicone on the Bottom and the

Back Edge of the Backsplash

Vanity

Apply a Small Amount of Silcone

to the areas shown

Drawer Console

Drawer Console Top

LET YOUR DREAMS COME ALIVE, YOUR PASSIONS

BECOME REALITY, BE THE ENVY OF YOUR NEIGHBORS

Figure H