Maka Technologies Marbella MXPro Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Cámaras de salpicadero Maka Technologies Marbella MXPro. Maka Technologies Marbella MXPro 20 páginas. Hd digital video roadcorder

Imprimir página

Note: During recording, a red spot on the left hand side of the display screen will starts

blinking.

Lock files manually while recording

 To Enable / Disable Lock

During recording, hold on "M" button for 3 seconds. To disable the manual lock,

hold on "M" button for 3 seconds again.

Note: A yellow lock icon will be shown on the right hand side of the screen.

To Enable/ Disable Microphone

 Toggle with the "Up" and "Down" buttons till "VIDEO RECORD MODE" is shown on

the screen

 Press "O" button to confirm

 Set to "VIDEO" to disable microphone or Toggle with the "Up" and "Down" buttons

to Set to "VIDEO+AUDIO" to enable microphone

 Press "O" button to confirm

 Press "M" button to Exit

Enable Motion Sensor

 Press "M" button will lead to the "SETUP" page

 Toggle with the "Up" and "Down" buttons till "MOTION DETECT" is shown on the

screen

 Press "O" button to confirm

 Toggle with the "Up" and "Down" buttons to select "ON"

 Press "O" button to confirm

Note: Recording will automatically on when camera detects any movements.

Loop Recording Setting

 Press "M" button will lead to the "SETUP" page

 Toggle with the "Up" and "Down" buttons till "LOOP SETTING" is shown on the

screen

 Press "O" button to confirm

 Toggle with the "Up" and "Down" buttons to select between "OFF/ 1 / 3 / 5 min

 Press "O" button to confirm

Note: This is a recording process which continues to record at the beginning, erasing the

previously recorded material and replacing it with the new content.

Page 9

Global Headquarter

2 Alexandra Road, Delta House

#02-03 Singapore 15991