decon INFM7112 Manual de instrucciones de montaje - Página 4
Navegue en línea o descargue pdf Manual de instrucciones de montaje para Silla de ruedas decon INFM7112. decon INFM7112 8 páginas. Liberty mounting set
Imprimir páginaMounting set
INFM7 Infinity Mounting set Universal
__________________________________________________________________________________
3. Assembly and adjustment of adaptor
First mount the holder (D) onto the bar (F)
and secure it by using the screws (H). Now
mount the preassembled parts onto the
wheelchair by using the chassis clamps (G),
see picture as example. The distance X from
the edge of the seating cushion to the
holder (D) should be, if possible, 20-30mm
so that the upper pin of the center pipe
adapter bar (A) is visible outside the edge of
the seating cushion.
The distance Y should not be greater than
20mm to ensure that the bar (F) gets
sufficient support. The front clamp (G)
should be mounted as close as possible to
the holder (D).
Tighten the screws in the clamps (G) just
enough to grip the wheelchair chassis so
that the bar (F) can still be adjusted inside
the clamps.
Assemble both sides.
__________________________________________________________________________________
Sida 4/8