IKEA 905.348.52 Manual - Página 12

Navegue en línea o descargue pdf Manual para Placa IKEA 905.348.52. IKEA 905.348.52 32 páginas.

Imprimir página

ENGLISH

Electrical connection

WARNING: All electrical connections

must be made by an authorised

installer.

• Before making the connections, check

that the rated voltage of the appliance

indicated on the rating plate corresponds

to the mains power supply. The rating

plate is affixed to the underside of the

hob.

• Only use original components supplied

by the spare parts service.

Warning Strips

• The appliance is not equipped with a

network cable. Purchase the correct one

Warning strips show that specialist should do the connecting water, gas and electricity:

from a specialist dealer.

• If the cables are damaged, replace with

original spare parts cables. Contact the

call center of your IKEA store.

Caution!

Do not solder any wires!

Electrical connection

• Follow the connection diagram (on the under

side of the product).

• This appliance has a Y-type connection and

requires a mains cable H05V2V2-F. Cable

needs mandatory sleeves. According to IEC

regulations use for one-phase connection:

mains cable 3 x 4 mm², for two-phase

connection: mains cable 4 x 2.5 mm² and for

three-phase connection: mains cable 5 x 2.5

mm². External cable diameter: min 8 mm -

max 12 mm. Please respect specific national

regulations in the first priority.

• The connection terminals can be accessed by

removing the junction box cover.

• Check that the domestic power supply

characteristics (voltage, maximum power

and current) are compatible with those of the

appliance.

• Connect the appliance as shown in the

The electricity installation

diagram (in compliance with reference

specialist.

standards in force nationally for mains

voltage).

The gas installation specialist.

The water installation

specialist.