IKEA KULINARISK Manual del usuario - Página 25

Navegue en línea o descargue pdf Manual del usuario para Placa IKEA KULINARISK. IKEA KULINARISK 36 páginas. Oven with steam feature
También para IKEA KULINARISK: Manual de instrucciones (20 páginas), Manual del usuario (36 páginas), Manual del usuario (16 páginas), Manual del usuario (32 páginas), Manual (36 páginas), Manual de instrucciones (48 páginas), Manual de instrucciones (36 páginas), Manual (24 páginas), Manual de instrucciones de instalación (36 páginas), Manual (20 páginas), Manual (44 páginas), Manual del usuario (36 páginas), Manual (40 páginas), Manual (40 páginas), Manual del usuario (20 páginas), Manual (37 páginas), Manual (32 páginas), Manual de inicio rápido (16 páginas), Manual (20 páginas), Manual (20 páginas), Manual (36 páginas), Manual (21 páginas), Manual de inicio rápido (8 páginas), Manual (40 páginas), Manual (20 páginas), Manual (32 páginas), Manual (36 páginas), Manual (17 páginas)

Imprimir página
IKEA KULINARISK Manual del usuario
ENGLISH
Cleaning the oven door
The oven door has three glass panels.You
can remove the oven door and the internal
glass panels to clean them.
The oven door can close if you
try to remove the glass panels
before you remove the oven
door.
Caution! Do not use the
appliance without the glass
panels.
1
Open the door fully
and hold the two
door hinges.
3
Close the oven door
halfway to the first
opening position.
Then pull forward
and remove the
door from its seat.
2
Lift and turn the
levers on the two
hinges.
4
Put the door on a
soft cloth on a
stable surface.
5
Release the locking
system to remove
the glass panels.
7
2
1
First lift carefully
and then remove
the glass panels one
by one. Start from
the top panel.
Clean the glass panels with water and
soap. Dry the glass panels carefully.
When the cleaning is completed, install the
glass panels and the oven door. Do the
above steps in the opposite sequence.
Make sure that you put the glass panels (A
and B) back in the correct sequence. The
first panel (A) has a decorative frame. The
screen-printing zone must face the inner
side of the door. Make sure that after the
installation the surface of the glass panel
frame (A) on the screen-printing zones is
not rough when you touch it.
25
6
90°
Turn the two
fasteners by 90°
and remove them
from their seats.