Ganz C-AllView Ti Manual del instalador - Página 5

Navegue en línea o descargue pdf Manual del instalador para Cámara de seguridad Ganz C-AllView Ti. Ganz C-AllView Ti 20 páginas.

Installation

Camera mounting

The camera is designed to be mounted upright or hang-

ing. By nature of its rugged construction the camera is

a heavy item and thus requires a substantial and stable

mounting. The camera is supplied with a mount adaptor to

allow fixing to industry standard brackets, towers or columns.

The mount adaptor has two cable entry points:

• A pass-through hole in the end plate to allow the com-

posite cable to enter unseen from a column, tube or

bracket type mounting, plus

• A conduit thread (M25) in the side wall to permit com-

posite cable entry via a flexible conduit attached to the adap-

tor.

To mount the camera

1 Thread the composite cable through the appropri-

ate entry hole into the mount adaptor before it is

fixed to the column or bracket.

2 To avoid placing strain upon the electrical connections,

arrange the composite cable such that approximately

25~35mm of the weatherproof connector protrudes

out from the smaller plate that will connect to the

camera.

3 Secure the mount adaptor to

the supporting structure us-

ing M8 bolts, washers and

Nyloc

type nuts.

IMPORTANT: Always use

Nyloc nuts in order to signifi-

cantly reduce the possibility of bolts

working loose during operation due to

vibration.